Page 1 of 1

Novatel NVT - 1320

PostPosted: 2013 Oct 26, 00:37
by spectreman
Discussion about Novatel NVT - 1320. Click 'Postreply' to write a comment!

Re: Novatel NVT - 1320

PostPosted: 2013 Oct 26, 00:40
by spectreman
Nice phone.
The transciever unit looks identical to the one with my Novatel 8305.
Very ruggedly made unit.

Re: Novatel NVT - 1320

PostPosted: 2013 Oct 26, 00:48
by hywel
i'm not sure if the handset is the right one, but I think it is !

Re: Novatel NVT - 1320

PostPosted: 2013 Oct 26, 04:27
by spectreman
Not sure about your handset, the handset with my set is quite different.
Have you tried powering up the phone yet ?

Re: Novatel NVT - 1320

PostPosted: 2013 Oct 26, 13:28
by hywel
The AA and this handset, seem to be interchangeable, I "radio error 3" on both ??

Re: Novatel NVT - 1320

PostPosted: 2013 Oct 26, 23:33
by spectreman
I have a copy of the Novatel 8300 series training manual, Australian version.
There is no mention of the error codes in it, however, so cannot help you out with that.
You could try these commands though :-

To enter Configuration mode:-
Lock the phone with the lock button.
Enter #259
Use the increase volume button to advance through the various screens.
Change value by pressing SND.
Exit the mode with END (this updates changes to the phone).

To enter Billing mode:-
Lock the phone.
Enter #185
Same controls as above.

To enter Service Mode:-
Lock the phone.
Enter #83*
(I have not used this mode at all yet , however).

To display the diagnostics screen (channel, RSSI etc):-
Press FCN 9 to start, FCN 9 to exit.

Yes, i will upload this training manual on the 8305 page.

Cheers, Chris.