Page 1 of 1

Motorola Brick / MicroTAC Dimensions

PostPosted: 2016 May 15, 10:09
by wasingtjme
Hi. Motorola 888 is very cool and also the last Motorola brick ever produced. But as far as I noticed, it is somewhat smaller than other bricks. I'd love to know its dimensions and those of some of other Moto's bricks (Lazer, Ultra Classics, etc.) as well as MicroTACs series.

Thanks! :)
wasingtjme

Re: Motorola Brick Dimensions

PostPosted: 2016 May 15, 20:36
by Thomas
Hi,Please wait a few days. I will send some information.

Cheers
Thomas

Re: Motorola Brick Dimensions

PostPosted: 2016 May 16, 17:21
by wasingtjme
Hi. I'll post some here, if anyone wishes. Updating.

DynaTAC 8xxx: 330 x 44.5 x 89.8 mm (with antenna)
MicroTAC 5200: 158.5 x 38 x 14 mm
MicroTAC Lite II: 172 x 57 x 32 mm
MicroTAC Elite: 153 x 58 x 22 mm
Select 3000e: 115 x 54 x 20 mm (?)
Select 6000e / International 8200: 140 x 60 x 27 mm (?)

wasingtjme

Re: Motorola Brick / MicroTAC Dimensions

PostPosted: 2016 May 27, 09:52
by Thomas
Hi,
The 888 has almost the same dimensions as the Ultra Classic or Lazer. I did this 3 times measured:

888: 280 (440) x 445 x 1940 mm (without antenna)
Lazer: 280 (430) x 445 x 1940 mm (without antenna)
Ultra Classic: 300 (440) x 445 x 1940 mm (without antenna)

The depth of the phone is different, they are narrower than the top and bottom in the middle. I have indicated the spot narrowest and in brackets the widest part.

The bulge of the antenna still would be added about 120 mm.

Cheers
Thomas

Re: Motorola Brick / MicroTAC Dimensions

PostPosted: 2016 May 27, 10:05
by Thomas
I made some pictures and upload them here: http://www.mobilecollectors.net/phone/3721

Cheers
Thomas